Alocasia Sarian is a large houseplant that is great for indoor spaces. This beautiful centerpiece features a light stem and leaf structure. This tropical centrepiece has dark green leaves and tiger-striped stems.
This plant is native to South Asia’s rainforests and will thrive in humid, warm environments. It needs to be watered regularly in summer and spring, while little water is fine in winter. It also requires full sun with some shade to ensure optimal growth.
Alocasia is part of the Arum family, which includes more than 70 varieties. These plants are found in tropical and subtropical parts of Asia and Australia. These plants can create a vibrant, tropical environment in any garden or landscape.
The leaves are formed as part of the stems rather than at their ends. It is a mix of two Alocasias: Alocasia Zibrina and Alocasia Micholitziana. It was named after Zac B. Sarian, an agricultural journalist from the Philippines.
This plant is known for its large, pointed leaves and is sometimes called the Elephant Ears.
This plant is often called African Mask because of its similarity to the mask used in African culture.
This plant can reach 12 feet high if grown in warm areas throughout the year. It grows to 5-6 feet tall in colder climates.
It can be hard to replicate the natural rainforest environment, but this article will help create one for your Alocasia Sarian.
Alocasia Sarian Care And Guide
1. Alocasia Sarian Soil Mixture
This plant requires light, well-drained soil that is airy and well-drained to ensure maximum growth. It is not recommended to plant it in heavy soils as it can be rhizomatous. Use sandy or rocky soils.
Alocasia Sarian can be cultivated in organically-rich soil with high moisture retention. According to the Missouri Botanical Garden, the USDA hardiness zones are 9 to 11.
If the night temperature is below 60 degrees Fahrenheit (15degC), this plant should only be planted outside.
Additional details on temperature will be provided later in this article.
2. Alocasia Sarian Watering
Make sure to check the soil often to ensure it is moist at all times. Spring and summer are active seasons for plants, so they need extra water to produce new leaves.
I recommend watering less frequently and in smaller quantities at frequent intervals. This will ensure soil retains the required moisture without making it soggy.
Roots cannot tolerate soggy soil or wet feet, so don’t allow the plant to dry completely.
This species is not drought-tolerant. Therefore, insufficient water can cause curling and crispy leaves. Your Alocasia may die if you don’t drink enough water.
This plant can be watered twice weekly in summer and once weekly in winter.
Instead of following a set schedule, I recommend relying on the soil’s actual moisture. Before water, press a few inches of topsoil between your fingers. Only water if it is dry.
The plant will go dormant during winter, which means it uses less energy. Reduce the amount of watering.
3. Alocasia Sarian Light Requirements
This plant’s most striking feature is its leaves. However, the plant requires bright indirect sunshine to keep its color.
The plant likes to be in partial shade and full sun. This plant is sensitive to direct sunlight and can easily burn.
4. Alocasia Sarian Temperature
Similar to other varieties, this Alocasia is sensitive to cold. It is happy in warm, humid indoor environments. For maximum healthy growth, temperatures between 65 and 72 degrees Fahrenheit (18 and 22 degrees Celsius) are the ideal temperature.
This plant can be fussy about the temperature. Lower temperatures can drastically reduce plant growth.
I have found that if my Alocasia suffers from slow growth, it can be moved to a warmer location. Your plant should be placed away from windows and doors that are drafty, as well as air conditioners.
This frost-sensitive plant can’t survive outside in winter. Frosty temperatures can severely damage the leaves.
Move your outdoor containers indoors when the temperature drops below 60 degrees Fahrenheit in autumn (15degC).
5. Alocasia Sarian Humidity
Low humidity is a problem for Alocasia plants. Indoor humidity must be at least 60%
A 70% level or more would be ideal. It should be placed in a moist area such as a bathroom or kitchen. Radiators are not recommended for the Alocasia as they can dry out the soil.
Plants can be grouped to create the desired humidity. You can also run a humidifier if you prefer to use artificial humidity.
6. Alocasia Sarian Fertilizer
Alocasia Syrians can be encouraged to grow by eating plant food. In spring and summer, you can feed your Alocasia Sarian with an all-purpose liquid fertilizer.
You might consider increasing fertilization if you see more growth. The plant will grow faster if it is in bright, warm areas.
Apply a slow-release fertilizer to your Alocasia plants periodically if you are looking for a low-effort fertilizing method. This will ensure that the soil is nourished throughout the growing season.
Slow-release fertilizer is better than over-fertilization, as the nutrients are slowly released into the soil.
Fertilization should be stopped in the late autumn and resumed in the spring.
7. Alocasia Sarian Repotting
The plant soil can be renewed annually. Repotting is not necessary if the plant is outgrowing the pot or if there is severe damage to its rhizomes.
Do not immediately pot a newly purchased plant. Allow the plant to adjust to its new surroundings. The plant may be shocked if you immediately report it.
8. Alocasia Sarian Pruning
Pruning is a great way to manage your houseplants, particularly fast-growing ones like Alocasia Sarian. This plant will grow leaves in every direction within six months and invade the space of the neighboring plants.
A few stems or leaves can be pruned and used for propagation. If the plant is infected or deteriorating, it must be pruned. It would help if you trimmed any yellowing or damaged leaves to give your Alocasia a new look.
Check Out This Guide
- Hoya Krimson Queen Care
- Hoya lacunosa Care
- Hoya Macrophyllas Care
- Hoya Cumingiana Care
- Hoya Krohniana
- Pothos Plant Care
- Alocasia Sinuata Care
9. Alocasia Sarian Propagation
You can multiply your plants easily without spending any money. The majority of Alocasia species can be propagated by clumping or Rhizome. If you don’t wish to report crowded plants, propagation is a great option.
The tuberous plant grows from a tuber, Rhizome. The offsets will also be small copies of the parent plants. These offsets are formed from the roots at the base of the plant. These offsets can be easily removed and replanted in separate pots.
To divide the Rhizome:
- Remove the Alocasia Sari from its pot.
- Brush off any excess soil.
- Do not try to push the soil away from the roots if it is densely packed.
Spraying water on the soil can soften the clumps.
Although the root system may seem complicated due to its interconnectedness, you can still easily separate the Rhizomes for propagation.
To untangle roots, use a pair of disinfected scissors or a knife. These tiny clumps/offsets usually have their root system, so you don’t have to wait for the root development.
- Although water propagation is preferred for stem cuttings and rhizomes, it is also a viable option for other purposes.
- You will need a small container or jar to hold the Alocasia Rhizome. To enjoy the plant’s growth, I use glass containers.
- Let the container sit in water for 24 hours. This will remove chlorine and impurities from the water.
- Now, submerge the Rhizome in water. Could you place it in bright, filtered light?
- Direct sunlight exposure is essential to avoid algae growth.
- Water can be replaced or added to whenever it feels like the water is getting too dry or has become contaminated.
- To encourage more growth, you can add a small amount of liquid fertilizer to the water.
- When you see new growth, move it to the soil.
- Soil is the most common rooting medium used for Alocasia propagation. The plant has small roots so you can put it directly in a new container filled with soil.
- Regular nursery pots can be used with drainage holes. Fill them with the appropriate potting mix.
- This is a crucial step for tropical species. They need moisture to thrive. Regular potting soil with coco coir or perlite is a suitable medium for a newly-propagated plant.
- Place the Rhizome into the mixture by creating a small hole at the center. Then, place the Rhizome into the hole and cover it with the rest of the soil.
- To moisturize the soil, give the Alocasia newly planted a light drink and place it in a sunny location to encourage further growth.
- The plant can suffer from transplant shock despite its roots. It may take several weeks to grow new roots.
- Congratulations, if the leaves begin to pop, you have successfully propagated Alocasia Sarian.
This plant can grow small spathe flowers all year with proper care. However, these flowers are secondary to ornamental foliage.
The unscented flowers of the Sarian plant resemble the Calla Lily. It flowered like a traditional aroid, with a spadix-like spike and surrounded by a spathe-like leaf.
These flowers are not attractive or showy and are white.
The domino effect is a similar pattern to this plant’s unique growth. Each leaf is separated from the stem of its predecessor.
This will result in beautiful lines on the leaves, which this plant is known for. This plant’s upper side has thick lime green veins that add to its beauty.
The unique tropical perennial has a heart-shaped, glossy leaf with prominent white veins. The thin cylindrical stems support the large, pointed upwards-pointing leaves.
The young Sarian leaves are arrow-shaped and have triangular and pointy tips. Each leaf develops a distinctive pattern, veining, color, and color as the plant matures.
Depending on the environment, veining and color may vary.
It can grow to 3-4 ft tall indoors, while the leaves can reach 1 ft. The Sarian plant can reach 5-10 ft in height outdoors, depending on the conditions. However, the leaves can get quite large.
The environment and location of the plant will determine the size.
This fast-growing, adaptable plant can quickly take over any space in months. In summer, it grows much faster.
This Alocasia perennial is frost-tender and must be winterized in colder months. These are some of the things you can do:
- Use scissors or a knife to remove dead leaves from the plant after the first frost.
- To regulate the soil temperature, add 2 to 4 inches of mulch to the pot’s base in the fall. This mulch can be removed as soon as the spring begins to allow for new growth.
- Tuberous Alocasia stems should be cut 2 to 3 inches above the soil line.
- Take the plant out of the soil and scrub away any excess soil. Allow them to dry out in the open for at least a day. The tuber roots can be stored in a mixture of vermiculite and peat moss. Keep them dry in a warm place.
- A basement is a great place to put roots. Direct sunlight should be avoided. Every few weeks, check the tubers for fungal disease or damage.
- These can be replanted in spring. After the danger of frost or freezing has passed, you can plant the tubers outdoors.
- It is a good idea to harden the Alocasia plant for a week before you move it outside permanently.
Alocasia Sarian: Common Problems
Brown spots on leaves
Brown spots can occur for many reasons. The top three are extremely cold temperatures, direct sun exposure, and low humidity. To prevent brown spots from appearing on other leaves, prune and remove those with brown spots.
This plant is very susceptible to rotting. It can even rot if the environment isn’t warm or cozy enough. To provide warmth, you can also use bottom heat mats.
Avoid excessive watering of Alocasia as it can cause Rhizome and other diseases.
Alocasia Sarian will develop yellow leaves if it is not adequately watered. This will eventually lead to the plant’s death. Plants that are underwatered also lose their leaves. I recommend understanding both of these scenarios.
Change your plant’s watering schedule to ensure proper air circulation. Your plant will be able to grow green again once you have found the right balance between over- and underwatering.
This pest is a major problem for Alocasia plants. You should inspect Alocasia plants for spider mites if you see grey discoloration. A small white webbing on the stalk and leaves is another sign of spider mites.
This pest can be removed by using herbal oil or neem. Chemical pesticides can be used, but excessive or high doses poison your plants.
Tips for Growing
- For photosynthesis, this plant requires clean leaves. To remove dust, you can wipe it with a damp cloth.
- Rotate your plant every so often to ensure equal light, water, and fertilizer distribution.
- The Alocasia Sarian can be planted outdoors, where strong winds are not a problem.
- Indoor planting requires that you place the Alocasia in a sunny window. The Alocasia will grow slower if it is placed in a cooler window.
Alocasia Sarian: Frequently Asked Questions
Is this a toxic plant?
This plant can cause severe irritation to the throat and mouth. It is best to keep it away from children and pets.
How often should my Alocasia Sarian be watered?
The plant needs to be watered once a week. Watering can be done when the top 2 inches are dry. It is important to let the soil dry out before watering. This will help prevent rhizome decay and overwatering.
Why are the leaves turning brown?
There are many reasons why leaf tips can become brown and dry. This can be caused by low humidity, over-watering, rhizome rot, chemical burns, or too much fertilization. These are all possible causes, and you can alter the care of your Alocasia Sarian.
Is Alocasia Sarian a durable plant?
It has a long-lasting life cycle, making it extremely durable. It can live for many decades if it is given the right conditions.
Are these plants easy to grow?
Because it is a warm-weather annual, the Alocasia Sarian can be grown in tropical climates and is very easy to maintain. Overwintering is the best way to save this plant from freezing temperatures. You will need to test different strategies to find the best overwintering method for your plant.
Can Alocasia Sarian take full sun?
The Alocasia sarian requires full to partial sunlight. They require 80 to 90% of the sun’s filtered light if they are described in percentages. Indoor potted plants need to be rotated regularly.
Does Alocasia need a lot of sunlight?
Alocasias require bright but indirect lighting. This is because Alocasia’s natural habitat is on the forest floor below the tree canopy. The leaves will burn if they are exposed to direct sunlight.
Is Alocasia Sarian a hybrid?
“Sarian” is a mix of Alocasia Zebrina (A. micholitziana ) and A. . It is named after Zac B.Sarian, an agricultural journalist hailing from the Philippines.
Why is my Alocasia Sarian droopy?
Drooping and brown edges – This is a sign that Sarian lacks humidity. This is often followed by yellowing leaves and dropping. You can increase humidity by moving her to a bathroom or placing her in a humidifier.
When should I repot Alocasia Sarian?
Spider Mites can form webs on your plant’s under-leaves if you aren’t careful. Repot once every two to three years with ‘Houseplant’ labeled compost. Add some grit to larger specimens to strengthen their root systems.
Why are my Alocasia leaves turning yellow?
Poor soil moisture, particularly overwatering, is the most common cause of yellowing leaves in Alocasia plants. Alocasia plants like to be kept moist (but not saturated). Regular watering is vital for Alocasia.
Is Alocasia good for indoor plant?
Indoor gardeners have good news: Alocasias will grow well in pots provided they receive enough light and humidity. These plants are known for their stunning foliage, brightening up any indoor area. If you take care of them well, they can be a delight in your home.
Conclusion On Alocasia Sarian Care
This plant is highly visible due to its unique leaf shape. Alocasia Sarian can be used in both traditional and modern settings.
The dramatic foliage of this plant can add a beautiful touch to any area in your garden or house.
It will only require minimal attention once it is established. This plant is a tropical species and does not like low temperatures. It is best to keep it out of direct sunlight and in cool places.
Check out more Guide Below
- Here are the five steps to take to care of a snake plant
- Philodendron Black Cardinal Care
- Philodendron Burle Marx Care
- How To Fix Root Rot Fiddle Leaf Fig Fast
- Philodendron Goeldii Care
- Philodendron Red Moon Care