Anthurium plants are beautiful creations by Mother Nature. The Anthurium magnificum isn’t an exception. They are closely related to Philodendrons and come in warmer regions, specifically South America.
The Anthurium plant features large, leather-like leaves. They’re lush and dark green with white veins. Some leaves change to an attractive copper color, which shines in the sunlight.
The petioles of the plant can be four-sided, or they’re C-shaped.
The plant is a source of sunshine within your house. The most significant part is that it doesn’t require special conditions to take care of.
We’ve got all the details you require to take care of your personal Anthurium magnificum.
We’ll guide you through the propagation process and provide the most frequent issues you could encounter.
Everything you’ll require to know is in the section below.
Anthurium Magnificum Plant Care
Table of Contents
Soil
An Anthurium magnificum plant requires well-drained soil. A well-drained soil balances out the soil’s moisture so that you don’t drown or be under-watering.
The first is that well-drained soil will ensure the excess water doesn’t end up on the ground. Instead, it drains down to the base.
Your roots won’t sit in a lot of water or become rotten.
However, the soil can still hold the water required to flourish and grow. It’s the perfect balance between the Aeration required in this soil type.
Our topsoil mix that drains well to use with the Anthurium magnificum comprises:
- sphagnum peat moss
- perlite
- mulch
- charcoal
The sphagnum peat-moss causes Aeration; therefore, more water can flow through.
The perlite also helps keep enough water in the soil to ensure your plant’s health.
Light
To grow An Anthurium magnificum plant, the bright indirect light can be of paramount importance.
As it comes from tropical climates, it thrives on sunlight’s warmth and the light it gives.
However, on the other side, they are partially protected by larger trees and plants. It isn’t designed to direct sunlight, which can harm the leaves of Anthurium.
Do not place it in the south or west-facing window. This can bring too much direct sunlight into your plant. Instead, consider a north or east-facing glass window.
If using artificial lighting, do not place your plant directly under the lights. Make sure to keep it at a distance of a few inches so that it can still get enough light not to be damaged.
Because it is the case that Anthurium magnificum is not in use in winter, you don’t require as much sunlight.
Anthurium Magnificum Watering
You must keep your Anthurium magnificum plant hydrated. The soil must be damp during their growing season, which runs from March through September.
It doesn’t need to be watered as frequently during the winter months. The colder air assists in retaining moisture.
A plant that isn’t getting enough water can shrink leaves and an ill plant. It could and will eventually die if it is left for long enough without sufficient watering.
However, you should be aware that you don’t overwater the Anthurium. Over-watering is among the most dangerous things you could do to your plant.
Root decay (or the wet feet) is the most commonly reported ailment resulting from excessive watering. When soil is saturated, the oxygen cannot get into the soil to reach the roots.
Oxygen is just as vital to the roots of your plant as water.
Without oxygen, roots begin to decay. If you don’t treat it immediately, all roots will begin to decay. The plant will die. The roots won’t be able to take in all nutrients required.
The best method to determine whether your Anthurium magnificum requires watering is by rubbing it on the surface of the soil.
You will be able to tell whether the soil is damp. If it’s not wet to touch, you can take the next step and sprinkle water on the plant.
Temperature
The ideal temperature for your Anthurium magnificum is between 65F (18C) and 75F (24C).
Beware of freezing temperatures and frost developing on the leaves. Ensure you don’t keep it outside in temperatures over 55F (13C) or less.
The Anthurium plant cannot take on cold weather in any way.
Anthurium Magnificum Humidity
You must be in a high humidity zone to have flourishing Anthurium magnificum. The humidity in the air attracts them.
Unfortunately, most homes do not have the humidity required to sustain your plant. However, you can change the issue.
If you reside in a region where is the air being dry, you’re likely to be looking to purchase humidifiers. It’s a great way to create humidity in the air, and it can be adjusted according to preferences.
Another option is using pebbles. It’s easy to make, and you’ll have everything you need in your home.
Take a tray and fill it up with pebbles. The pebbles must be smooth and round so the pot will sit comfortably.
Once you have filled the tray full of pebbles, then fill the tray with water. The water must sit below the pebbles but not completely cover them.
You can now place your pot of Anthurium magnificum on the pebbles and sit back and watch. Water will evaporate and create much-needed humid air.
Since the plant is just above the water, any water will be directed towards it.
You may also spray plants’ leaves and then off. The water will disperse, and the plant will absorb it.
The only issue with this method is that you don’t know when it is the right time to spray the Anthurium plant. It’s an unpredictability game.
Anthurium Magnificum Fertilizer
Anthurium magnificum plants love fertilizer. This is one of the plants that should not be sacrificed on the fertilizer you care for.
You should fertilize your plant every 6-8 weeks during this growing time.
It is recommended to fertilize your plant at least once in the winter months. The cold weather holds on to fertilizer for a more extended period.
Be cautious during winter, as it is common to over-fertilize. If you fertilize too much, salt gets absorbed into the soil. Your plant then burns the roots.
The only way to correct the over-fertilized soil problem is to flush it away or swap it completely.
Anthurium Magnificum Propagation
There are two methods to grow an Anthurium magnificum plant.
First, it’s the popular method employed by most species. This is propagation through the stem and soil. This is the most straightforward option, but it’s not always ideal for this plant.
The most effective method is root division. This creates the strongest and most advanced Anthurium plants.
We’ll go over the propagation process in detail later in this post.
Growth
Anthurium magnificum can grow to be between two and five feet tall.
The leaves of the plant may grow quite large. They can range from 6 to 10 inches long.
Potting
Repotting the Anthurium magnificum is easy. The ideal time to do this is in springtime.
It takes around two years for this plant to reach the size of a pot. You can tell this by the drainage holes that are in the pot. If roots appear to be sticking out, It’s time to switch out.
The new plant pot is supposed to be a little larger than the previous one. Anthurium roots can be stressed if they aren’t feeling compacted.
Check out more Guide Below
- Here are the five steps to take to care of a snake plant
- Philodendron Black Cardinal Care
- Philodendron Burle Marx Care
- How To Fix Root Rot Fiddle Leaf Fig Fast
- Philodendron Goeldii Care
- Philodendron Red Moon Care
Anthurium Magnificum Propagation Steps
There are two ways of propagating the Anthurium magnificum. It is best to choose based on your personal preferences.
The most straightforward method is the planting of stem cuttings into soil. However, the most effective way is to divide the root.
Using Stem Cuttings
Based on the University of Maine, the procedure of stem cuttings requires using the existing plant to grow an entirely new plant.
One of the first things you’ll need is an Anthurium magnificum of high-quality stem-cutting. The stem cutting must be at minimum three inches long, and you must cut just below the leaf node. It’s a big increase if two leaves are left when you take it off. You’ll need a sterilized pruner to cut your stem. You can use isopropyl alcohol to clean, and you’ll be prepared to cut.
It is important to allow your stem cutting to heal. This means it should be kept in a warm area for a minimum of one week. This will allow the cut side of the stem to heal.
While you wait for your stem cuttings to dry, you can start getting your plant pot in place. The plant pot will need drainage holes at the bottom. When excess water drains from the bottom of the pot, it will also flow from the top. In other words, the water will sit on the ground at the base.
After an entire week, it is time to plant the cut stem. Use your finger and stick it into the soil just a few inches deep. The stem cutting should be placed in the pit, ensuring a couple of inches are visible. The soil should be piled around the bottom to keep the cutting.
If the stem cutting doesn’t seem to be able to remain up, secure it with the straw cut. You only need the straw until the stem can stand up by itself.
Then you must take care of the stem cut like the Anthurium magnificum original plant. Place the plant pot in a north or east-facing window. Be sure that it is receiving enough water to flourish.
Using Root Division
The initial step in the root division process is to take the plant’s original pot. You need to be careful not to hurt the roots when you pull the Anthurium magnificum plants out.
The faucet should be run on the roots. Don’t let the water run at full speed as roots can be fragile. You’ll want to get all the dirt off the roots, so splitting them will be much easier.
The time has come to eliminate some roots in the first Anthurium plants. Again, you must be cautious to avoid injury to one of the root systems.
The divided roots should be placed on a towel, so they dry. Leave the roots out for around 24 hours. At this point, they should be dry.
When your roots dry out, you can prepare the plant pot. The plant pot must have drainage holes on the bottom. Fill the pot with the soil mix that drains well.
If the roots aren’t damp, you can put them in the ground to start your Anthurium magnificum. Create a small hole in the soil to accommodate the roots. Be sure the roots are fully submerged in the soil to expand and grow.
You now have to take care of the roots just as you did with the original plant. This means you must ensure that it is always hydrated and gets the proper indirect sunlight.
Other Varieties of Anthuriums
There are over 1000 different Anthurium species. It is difficult choosing just a few.
Here are a few of our favorite ones to take take care of.
Anthurium warocqueanum
They are amazing Anthuriums. They develop extremely wide and long leaves. They’re sometimes called “Queen Anthuriums.”
Anthurium veitchii
Anthurium veitchii Anthurium veitchii is another of our top Anthurium plants. It’s known as “King Anthurium.” Although they’re usually cultivated outdoors because of their size, they can use them in most homes.
Crystallinum of Anthurium
The Anthurium plant is part of the lower spectrum of Anthuriums. They have stunning green leaves that are adorned with white veins.
Anthurium obtusum
Anthurium obtusum is an exceptional plant. The leaves are broader than the majority. However, the fascinating aspect of this plant is the flowers it blooms. They look like pearls of white placed on top of one another.
Anthurium scandens
This is a medium-sized herb. The leaves are quite small and do not appear to be too long. They also grow beautiful flowers along with the leaves.
Common Issues in the Anthurium Magnificum
Pests in the plant can be a source of trouble when caring for Anthurium magnificum. There’s something about these plants that they adore and are drawn to.
Examining any new plants you bring before placing them in your Anthurium is essential. This is the best method to ensure that you don’t have to contend with any pests that may be present in your garden.
However, you’ll be fighting plant pests at times.
Aphids
Aphids are among the most prevalent pests found within the Anthurium plant. They’re also among the tiniest and toughest to detect pests of plants you’ll encounter.
They are available in shades, including brown, white, and red.
Aphids feed off the sap within the plant. Their mouths resemble straws that penetrate plants’ flesh. The mouths then proceed to take the sap and suck it up through.
A tiny aphid problem isn’t an issue. The issue is that they reproduce quickly. Once you have many of them, your plants won’t stand a good chance of survival.
A massive infestation is equivalent to hundreds of mouths taking this sap away from the plants.
Aphids also leave their waste after they eat. Honeydew is a sugary substance that attracts ants. Ants are not suitable for plants.
Thrips
Thrips are a regular plant pest. They not only take sap from your plants, but some species also bite human beings.
You’ll have trouble being able to see those tiny creatures. If you shake your plants, they’ll emerge from the bushes.
It is rare to know that you have a thrip problem until your plant becomes sick. They appear out of thin air and disappear from your plant without nutrition.
In the case of these insects, it doesn’t matter whether your problem is small or huge. They can cause massive damage in just a few days.
Spider mites
Spider mites are a different possibility for an infestation of plant pests. As opposed to the other options mentioned, they’re not insects. They’re arachnids, which have eight legs.
It is easy to spot the presence of spider mites by tiny webs of tiny webs are forming within the leaf of the plant.
The most effective method to deal with most pests on plants is natural Neem oil. This is less likely to cause harm to your plants; however, you’ll need to examine the area to ensure there aren’t any negative reactions.
Always dilute the oil of neem with water. Mix them in the clean spray bottle. You can then spray your plants using the oil.
Neem oil has a very thick substance that can suffocate insects immediately. In a matter of minutes, you must clean the dead pests from your plant.
Tips for an Unhappy Anthurium Magnificum
No matter which plant you’re caring for, there will be times when you face problems from time to time.
With patience and care, you can maintain your beautiful Anthurium content.
Here are a few of the most frequently encountered issues you could encounter and solutions to these issues.
Your Anthurium Magnificum Plant’s Leaves are Yellowing
The appearance of yellowing leaves on the Anthurium magnificum is usually the initial indication of watering too much. The plant standing in water is among the most detrimental things you can do to it.
If you want to ensure that the roots are healthy, You’ll need to take the plant out of the pot. If there’s a root rot problem, there’s a lot of work to complete. If all your roots are decaying, the plant will not last.
If your roots are in good shape, The only thing you need to do is to water the plant less. Unless your soil is over-watered, changing it to fresh, dry soil is best.
Your Anthurium Magnificum Plant’s Leaves are Dying in Spots
Anthurium magnificum plants which are rotting are receiving too much direct sunlight.
These spots of decay are scorch marks left by the beam of light hitting the leaves.
It’s in the best interest of the plant to trim the leaves that have been burned. The leaves won’t improve the way they are.
Positively, your plant won’t end up dying. The only thing you need to do is remove the plant from direct sunlight. In the place that your plant is, you can move it to an area that receives less sunlight (as we’ve already observed earlier, bright indirect sunlight is the best option).
Anthurium Magnificum FAQ
Does my Anthurium magnificum poisonous to my pet?
Yes, the Anthurium magnificum plant is poisonous to humans and pets. Like Philodendron plants, Anthuriums are covered with calcium oxalate crystals. The crystals irritate the throat and the esophagus that is going down.
Do I need to reduce the fertilizer I apply to grow the Anthurium magnificum?
Reducing the amount of fertilizer you use to fertilize the Anthurium magnificum plant is recommended. It is easy for salt to build up in the soil and then burn the plant’s roots.
When should I report the Anthurium magnificum?
It is recommended to report your Anthurium magnificum immediately after you come back home. Most places don’t have the proper soil to grow the Anthurium.
Conclusion On Anthurium Magnificum Care
The Anthurium magnificum is among our top Anthurium plants to plant in the garden. It stands out among other species and blends nicely with Philodendron plants.
Looking for other articles on our plant guides, then check this out
