It is believed that the Jade Satin Pothos is a rare plant that’s difficult to locate. It was not expensive either. On average, expect to pay $50 to $100 to purchase a garden. Sometimes, even more.
It is referred to by Jade Satin Scindapsus, a variation from the Scindapsus pictus known for its Satin Pothos.
It’s a to that of the Pothos (Epipremnum aureum). This is why its common name could be misleading, as can its appearance, making it very easy to mistake it for an actual pothos plant.
In any case, both are part of at least one of the Arum families. Therefore, there is a resemblance.
The main difference between Jade Satin Pothos and the Satin Pothos is the former does not have striations, while Siler patched leaves characterize the latter.
However, the Jade Satin Pothos is a gorgeous vining plant that is a pleasure to climb. It will reach its highest potential for growth if you allow it to climb up the pole or in a similar vertical arrangement.
It looks stunning and also in hanging baskets. That’s why home gardeners choose to display it in this manner.
As the vines grow longer, you’ll need to cut them. However, the plant is easy to maintain.
Jade Satin Pothos Plant Care
One of the main aspects that Jade Satin Pothos requires is lighting. It is a great choice for both artificial and natural light. However, the latter is more efficient because sunlight gives plants the entire spectrum of colors.
So it is recommended that you get at least 6 hours of direct, bright light that can allow it to expand optimally. However, it is recommended to have a minimum of 12 hours of exposure to growing lights to get the same results.
It is an easy-to-care-for house plant due to its ability to thrive in various lighting conditions.
Although it is best, it is surrounded by lighting; it does not like low or medium light. Beware of places that are dim or dark.
As a rule of thumb, If you cannot understand the newspaper’s body content in this location, then there’s not enough lighting to sustain the plant.
Therefore, leaving it in place can cause it to be sagging or slow its growth.
Outdoors it is best in partial shade from the scorching sun. This is because there aren’t any walls or ceilings to block sun exposure. This means that it needs extra shade on the outside.
Another key aspect to keeping your Jade Satin pothos healthy is the climate. It is a tropical plant in its natural habitat. It is. Therefore, it prefers warmer to moderately warm climates.
In addition, it allows for the provision of sunshine throughout the year without snow.
This makes it a great choice for USDA Zones 10-12. It is not tolerant of snow or frost, so leaving it out in winter could eventually kill the plant before the spring season arrives.
For best growth, keep the temperature between 60 to 85 degrees Fahrenheit. In addition, this is the temperature that humans like that make it simple for the plant to adapt to the environment of our homes.
It can also handle higher temperatures. But, it will not be able to endure temperatures below 50 degrees for extended durations of time.
Therefore, you should not leave it outside when the colder weather arrives. In the indoors, you’ll need to keep it from rooms with air conditioning or cold vents and drafty places.
Jade Satin Pothos is a native of Southeast Asia, where it is not just hot (and extremely hot at times) but also very humid. The average humidity ranges from 55 to 75 or more, depending on the time of the year.
Therefore, plants prefer humidity levels of 50 to 70% to ensure maximum growth.
Fortunately, it doesn’t dislike humidity in the home when it’s between 40 to 50 percent. It can also be tolerant of temperatures in the upper 30s in addition to its different living conditions.
But, you’ll have to know what the humidity levels are in your home. It would help if you also observed the humidity level in dry, hot summers and winter when the air can dry out quite some.
If you notice that the humidity is insufficient to meet your plant’s needs, then you should consider any of these methods.
- Set it on top of the stones in a tray of water
- Combine it with other plants
- Take it into the kitchen or bathroom.
- Make use of a humidifier.
The most obvious method that isn’t used is misting. This is something I wouldn’t recommend for this plant.
The reason is that plants have crinkles in their leaves that are fragile. The force of touch or spraying with a lot of water could damage or alter the texture of their leaves.
Additionally, if your plant has roots that are aerial misting could irritate the roots, increasing the risk of being overwatered.
Therefore, I would prefer to employ other methods in addition to misting.
Take note that the same principle applies to cleaning the leaves. The leaf’s texture means the leaves will collect more dust and dirt between the wrinkles. Therefore regular cleaning is crucial.
I prefer to place the plant in the bathroom sink to give it a good shower. This not only washes the leaves but also aids in reducing humidity. This can be done monthly instead of the above methods.
However, be sure to allow the plant to dry. This means you should place it in bright indirect sunlight and with adequate air circulation to allow it to dry its leaves quickly.
Do not apply oil or shine on the foliage, as it can cause damage to the leaves or block the pores.
How Often to Water Jade Satin Pothos
Jade Satin Pothos enjoys moist soil in the spring and summer months when it thrives. But, it is susceptible to excessive watering.
So, you should be aware that frequent soggy, damp, or muddy soil can eventually lead to root rot.
Wilting and yellowing leaves are two signs that your plant is receiving excessive amounts of water. It also means you must reduce your watering schedule as soon as possible.
However, the water level isn’t a problem since pothos can withstand dryness a bit. Therefore, it can tolerate inattention and occasionally missed waterings when you fail to water your plants.
Even if it is a little dry, it can bounce back.
According to my experiences from my experience, Dry Jade Satin Pothos will be curly in its leaves and appear rather dull. It also has dry-looking leaves.
Once you’ve hydrated it, it’ll heal within the next two to three days and be extremely sexy again shortly afterward.
Therefore some growers wait for the plant to begin showing signs of drying before they water it.
On the other hand, I prefer to allow the soil to dry just a bit so you. You can continue to water when the soil is dry beyond 1 or 2 inches above the surface and is dry enough. Be careful not to overwater earlier than.
To determine this is the case to determine if it is the case, stick your index finger in the earth and then feel any wetness.
You can also use a moisture meter to determine the water on the ground.
- Glacier pothos Care
- why is my pothos turning brown?
- Pearls And Jade Pothos Care
- Variegated Neon Pothos plants Care
- Manjula Pothos Care Guide
- How To Fix Hawaiian Pothos Yellow Leaves?
- Hawaiian Golden Pothos Care
- Snow Queen Vs Marble Queen Pothos Differences
- Why Is My satin pothos leaves curling?
Soil for Jade Satin Pothos
Jade Satin Pothos Jade Satin Pothos cannot grow in soggy or wet soil. This also puts it at risk of developing root fungi and rot. So, it is best to avoid areas with heavy soils and those that tend to hold more water.
Instead, choose a product that can remove excess moisture effectively.
Remember that when it comes to plants, a mix that drains well does not mean that it will completely drain the water immediately after you pour or use your garden hose. Instead, it will hold enough water to nourish the plant and remove any excess water, so the plant does not end up in the water.
However, rapid draining soil, such as one composed of all sand, will quickly permit water to be able to. This is another type of soil to be avoided, as Jade Satin Pothos can be dehydrated over time as time passes.
In addition to well-drained soil, pH ranges from 6.1 to 6.5 will help the plant develop optimally.
A combination that works is peat pine bark, moss, vermiculite, or perlite.
Another reason that the Jade Satin Pothos is also easy to maintain and requires low maintenance is that it doesn’t necessarily require fertilizer.
I’m saying this because adding a tiny amount of fertilizer will allow it to increase its growth and appear more attractive.
However, since it doesn’t require an excessive amount, it is essential to be cautious not to overdose on the food plant.
Fertilizers can give you the most effective results when your soil is poor. This compensates for the soil’s deficiencies.
To feed your plant, apply an evenly-balanced liquid fertilizer every month from spring to autumn. Be sure to dilute your dosage by half.
It is not necessary to feed plants in the winter months.
Jade Satin Pothos Pruning
The Jade Satin Pothos plant is a vine with the potential to grow to about 4-10 feet in length.
The receptacle is classified as a climber, which means it will reach its highest growth potential when it is allowed to climb the support.
It does very well hanging on a container or basket also. Many gardeners display their plants in such a way since it is beautiful.
Another method is to allow it to grow in a container, allowing the vines to stretch and spread across the container.
The choice you make will determine how often you trim the plant. The first option will require the least amount of pruning unless you have a particular size limit you wish to establish.
You could also allow it to grow if you hang it from a basket. But, the second option will likely end up dirty sooner rather than later.
The plant is beautiful. When it’s bushy, it’s best to let it mature.
However, you can cut it based on your preferred size and shape. Therefore, trimming is more aesthetic.
The only necessary pruning is to trim any damaged or discolored leaves. Foliage.
Jade Satin Pothos Propagation
Stem cutting is the most simple and effective method I’ve come across for propagating Jade Satin Pothos. This should be done in spring or early summer when the plant fully blooms. This allows the cuttings to take root quickly and develop from there.
The cuttings can be rooted in soil or water. Both are very effective.
However, I’ve discovered that starting in water can speed up rooting. However, you have to move it into the soil shortly or sooner. Strangely enough, pothos can be found in water, but it has an issue with wet soil. It’s quite ironic.
However, the soil-based method of starting means not having to do the extra step of growing roots in water. Because the soil has greater protection against water, roots are slower to grow in soil.
So, it takes a bit longer for cuttings to establish roots in the soil.
I’ve also noticed that establishing in water has an increased success rate in soil.
However, I highly recommend using the most comfortable method and getting the most effective results.
Here’s how to accomplish both ways.
- Make three to five inches of stem cut. You want a healthy stem with, at minimum, some leaves.
- Take off the lower leaves to reveal the leaf nodes.
If you want to reproduce in the water:
- Cut the stem and place it end-to-end into the glass, jar, or water.
- Keep the jar out of direct, bright light.
- Within two weeks, you’ll notice roots beginning to grow within a couple of weeks. Let them continue to grow.
- When the roots are approximately an inch, you can transfer the cutting into a smaller pot with a fresh mix of potting soil. Letting the cutting develop in the water for a few days is also possible. It’ll be fine in there for a while. However, I haven’t been up to one year, so I’m not sure whether it’s able to.
If you want to establish a new plant in soil:
- Create a small container (6″ pot). Fill it up with a freshly-prepared, well-drained potting mix.
- Applying water to the soil is recommended before or after planting the cutting stem. Be careful not to plant in wet soil, which is sloppy. Moist can be more than sufficient.
- Cut the stem and plant it in the soil.
- The plant can be covered by a plastic bag that has holes. The holes will allow air circulation. The bag boasts humidity which speeds the growth process.
- Place the plant in direct light that is bright and not in a sunny spot.
- In 3 or 4 weeks, it will begin to develop roots. But, you won’t be seeing the roots like you can inside the water bottle. Therefore, to check the roots, gently tug the plant. It should not resist this, which indicates that the root system is beginning to take shape.
How to Repot Jade Satin Pothos
It is important to note that your Jade Satin Pothos does not require repotting every so often. It will last from 2 to 3 years on average before it requires to be relocated to a bigger container.
And, the only instance (outside of emergencies) where you’ll need to move your plant is when it’s outgrown its current home.
The good thing is it’ll inform you of the time.
Sometimes, you’ll see roots emerging from the holes in the sides of your pot. They may also circle the pot and wait at the soil because of insufficient space.
The best time to plant is at the beginning of the season.
Here’s how to refill Your Jade Satin Pothos.
- Find a container two inches bigger than the container you currently use. Do not go over 2 inches.
- Also, keep some new soil that is well-drained and drains available since you’ll be replacing the old earth with the new.
- Find a place to plant. I prefer to do this outside since it can create an obnoxious mess. However, you can perform it indoors too. However, I recommend covering the floor with newspapers or plastic, so it is easy to clean up afterward.
- Remove the plant from its container.
- Examine the roots and remove the dirt and soil accumulating in your root ball. I also recommend separating roots that have become stuck together more. The more tightly bound to the pot plants are, the higher number of overlapped roots you’ll encounter.
- The new pot should be filled with fresh potting mix to approximately a third of the way. It would help if you estimated the height of the plant so that it can stand out from the pot at the same level as the previous container, but not down.
- Put the root ball in your new container. Then, fill the remaining area with dirt.
- Soak the soil until it’s the soil is moist.
Pothos are harmful to both humans and pets. The Jade Satin Pothos is not an exception.
Consuming plant parts may cause inflammation of the throat, mouth, tongue, and digestive tract since calcium oxalate crystals are not processed by our bodies.
This could cause vomiting, nausea, swelling, and other issues.
Pests and Diseases
Jade Satin Pothos doesn’t have any issues with bugs or diseases. It’s all about proper care and providing it with the environment it requires to thrive.
The spider mites and scale can cause problems since the two types of insects tend to attack the plant to extract its sap.
Therefore, regular inspection is necessary to identify and resolve issues as quickly as possible.
Root decay, fungus, and bacterial issues can occur if moisture isn’t maintained.
Since plants are prone to humidity, this can increase the chance of having problems with moisture. Therefore, it is important to be careful when and how often you water your plants.
If you can, try to stay on the dry aspect of things since the plant will endure this situation very well. Even if you do not water it, it can rebound quickly after you give it water.
Conclusion On Jade Satin Pothos Care
A stunning and stunning trailing plant you’ll ever see It’s the Jade Satin Pothos is perfect for hanging baskets and tabletops too.
It is also simple to maintain due to its low maintenance.
Looking for other articles on our plant guides, then check this out
- Why is My Zebra Plant Leaves Turning Brown?
- cobra fern plant care guide
- Pothos Plant Care
- Why is my asparagus fern yellowing?
- Why Are My Caladium Leaves Curling?
- Here are the five steps to take to care of a snake plant
- Philodendron Black Cardinal Care
- Philodendron Burle Marx Care
- How To Fix Root Rot Fiddle Leaf Fig Fast
- Philodendron Goeldii Care
- Philodendron Red Moon Care