philodendron Deja Vu Care: Philodendron DejaVu is a houseplant that is evergreen with a dark-green rippled leaf and an undulating edge. It is a philodendron that is under-appreciated that isn’t very well-known among those who love houseplants.
Find out all the details about its maintenance requirements in this complete and no-fail manual.
What Is Philodendron Deja Vu?
Philodendron Deja Vu, also known as Philodendron bipinnatifidum (Thaumatophyllum) is a self-heading Philodendron that is distinguished by its unique foliage. It belongs to the Araceae family and belongs to the Philodendron Genus.
The plant can be grown and harvested in the warm humid jungles of Brazil in the Brazilian and Mexico. Needing warm temperatures and humid conditions makes this plant ideal to thrive in tropical climates.
– Size and Growth
Philodendron Deja Vu’s rate of growth is moderate because it is a straight-growing plant. It is a self-heading species and doesn’t have long vines. They grow more slowly than vining philodendrons. However, they can sprawl like vines that grow slowly.
If properly cared for the plant will grow as high as four feet in length and make it a perfect garden plant. It typically reaches the maximum height that is around 24 inches. The perennial shrubby Philodendron is flexible and delicate stems, which carry green leaves. It doesn’t lose its leaves in the fall, like other plants.
The plant is characterized by easy and flexible branches. Protect it from the weighty overhang of other plants. avoid it from large objects, and provide it with adequate space to spread and grow.
Philodendron Deja Vu is a cultivar that looks very similar to Philodendron Xanadu. This plant can be toxic if consumed It is best to keep it from pets and children. It could cause minor irritation to ulcers within the throat and can cause skin irritation for some people.
Philodendron DejaVu is a plant with sharp leaves. Its new leaves begin with smooth edges and as they grow they begin to develop sharp edges. The foliage is straight and is not in the shape of an erect vine.
As time passes the lobes of the younger leaves begin to become more wrinkled and sharp. It is a perennial that does not flower and has many stems sprouting from the same base.
Philodendron Deja Vu is not believed to have a large root system. It is a slow-to-moderate-growing species and takes between 2-3 years to get the roots to grow further into drainage channels.
Due to this, it is not necessary to repot frequently. The roots are neither too soft nor hard, however, be careful not to damage them when doing repotting.
Here’s a list of the plant’s requirements.
|Requirements||Philodendron Deja Vu|
|Light||Well-adapted to light to moderately light conditions|
|Water||Let the soil dry out slightly between irrigations|
|Soil||The soil must be very loose and well-drained. soil|
|Humidity||A high humidity level that is over 50 per cent|
|Temperature||Temperatures range from 65 up to 75 degrees Fahrenheit|
|Fertilizer||Apply a liquid fertilizer that is balanced every month beginning in spring through late summer.|
Philodendron Deja Vu Care
Philodendron Deja Vu is among the most simple Philodendrons to maintain. Below are a few of the basic requirements for growth. Modify them to suit the local environment.
– Light Requirements
Philodendron Deja Vu needs light levels that are low to moderate for good growth. It is a great choice even under fluorescent light. Any light source that is bright and shaded is an ideal place to protect this plant from too much light that causes the darkening of the leaves. Close to the window but far from direct light is the best location to plant this plant.
In bright light conditions, the leaves begin to change to pale, and then yellow. Under very low light conditions the leaves will change to a darker shade of green. In low light plants, they are also at the risk of suffering issues resulting from overwatering, like root rot or fungus growth so be mindful when the amount of water you give especially if the plant is kept in dim lighting.
– Water Requirements
The watering of Philodendron The Deja-Vu must be in line with the soil that is allowed to dry between waterings. It is not a fan of wet feet and in moist soil conditions, it starts to show signs of root rot as well as other fungal diseases. Although it is a tropical plant It has minimal requirements for water and can go for weeks without watering.
When you make sure that you aren’t letting your plant overwater, the plant is sure you don’t drown it too. In addition, underwatering can cause problems for your plant in the future. The browning of leaves and the crisp edges indicate that your plant isn’t receiving enough water. The plant is drought-resistant, but don’t put it under pressure by putting it in dry conditions for extended durations of time.
– Soil Mix Requirements
Philodendron deja vu soil must be extremely loose and well-draining like the cactus potting mix. Make use of regular potting mix mixed with perlite and sand to ensure it drains well. Include organic compost to make it more rich and fertile.
The amount of sand and perlite you mix will be contingent on other variables like temperatures and humidity in your region. In general, you should use two portions of normal soil one part sand or perlite and one portion of vermiculite or organic compost. You can adjust the amount accordingly.
The ideal soil pH is 6.1 up to 6.5. To maintain this level, sprinkle vinegar on the soil. Mix 2 drops of vinegar with water before adding the soil.
– Temperature Requirements
Temperatures that range between 65 to 75 degrees Fahrenheit are ideal to encourage the growth of Philodendron Deja Vu. While it is tolerant of temperatures as low as 45° Fahrenheit, it is best not to place its temperature lower than 55 degrees Fahrenheit.
Avoid exposure to cold breezes and sudden temperature shifts. Philodendron Deja Vu is a perennial plant meaning that it is most productive in warmer temperatures. However, just because it is an elevated temperature doesn’t necessarily mean it can survive extremely hot conditions. It is a void of extremes, both hot and cold.
– Humidity Requirements
Philodendron Deja Vu is a plant that prefers humid conditions in its surroundings to thrive. It thrives with other plants in moist environments. Make sure to keep the humidity at or above 50 per cent to ensure that this plant is healthy.
Place humidity trays underneath plants to boost the levels of humidity. To prepare a humidity tray, you need to fill it with pebbles, and water and ensure that your container is above it. As the water evaporates plants will absorb the necessary moisture.
– Fertilizer Requirements
Make use of balanced chemical fertilizer for feeding the Philodendron Deja Vu every month during spring and the end of summer. Feeding the proper amount at the appropriate timing encourages growth and improves the appearance of the foliage. more supple and glossy.
Note that the plant is in winter dormancy. The absence of new growth indicates no need for additional nutrition So doesn’t worry about fertilizing in the winter months. Do not wait until spring before you can resume regular fertilization.
More than fertilizing or fertilizing during the winter months can lead to problems like salt accumulation which can cause root burn. The root burn could even cause death to the plant. The amount of fertilizer and frequency should be controlled so that the plant will not suffer from burns on the roots. In addition, too much fertilizer makes it unhealthy for the soil over time.
Check out more Guide Below
Philodendron deja vu is not required to be repotted for a minimum of two years. It has a slower to moderate rate of growth and, therefore, it isn’t necessary to repot every year. A slower growth rate implies smaller roots. It’s when you notice the roots emerging from drainage holes that it’s time to move the plant to a larger container.
Pick a longer and wider vessel or pot to refill it. Two inches larger and longer than the one before works great. A pot that is between 10 and 20 inches in diameter and 10 inches in depth is ideal for medium-sized plants.
After removing the plant from the pot, take out the black and dead roots, if there are any. Create a new soil mix of regular potting soil and perlite. Fill more than half the pot, put the plant inside, and then cover the roots with soil, pressing it into the roots. The plant should be kept in a shaded area and allow the roots to acclimatize into the soil.
Philodendron Deja Vu Propagation
P Hylodendron Deja Vu can be cultivated by seeds leaves, stems and cuttings. Seed propagation can be difficult to accomplish at home, which is why we suggest the method of propagation using stem cuttings. It’s much simpler and yields excellent results.
To make stem cuttings for propagation you need to cut the stem beneath the node. Then, you can place it directly into a jar of water or the soil mix. It will take between 10 – and 20 days before newly formed roots begin to sprout.
If you put cut-offs underwater and then moved them back to in the dirt after 20 days. Make sure the soil is wet at first, as the new roots require a lot of water.
It is important to note that the Philodendron Deja Vu is not immune to all insects and other diseases. It could face some issues at times, but if untreated.
– Leaf Spot
It is a common issue in all Philodendrons. The leaves start to turn yellow and then to turn brown. It is most likely caused by excessive watering which leads to the growth of fungus and bacteria that thrive in moist and humid conditions.
To address this issue to treat issue, stop watering your tree to treat the issue. apply two tablespoons made of baking soda and soap water to the affected areas. The plant should be kept away from direct sunlight. Use commercial fungicides if the issue is serious.
– Erwinia blight
Erwinia Blight inflicts damage on the stem and leaves of the plants. It is responsible for the appearance of water-filled lesions that are yellow-brown that appear on stems. It’s difficult to eliminate Erwinia however, bactericides that contain copper could slow the spread.
When you notice the plant becoming affected, you should remove the affected area and shield the rest of the plant by using the bactericide.
– Root Rot
Philodendron DejaVu can’t stand the pressure of poor soil conditions. If you overwater your plant, it is likely to be affected by root decay. It appears as pale yellow leaves, which slowly become mushy. In the end, the plant is prone to dying due to decay.
To address this issue, change the soil mix as soon as you notice the problem. Use a well-draining soil mix that is aroid and monitor the frequency of watering. Only water when the soil is dry. The test of the finger to determine if the plant requires water or not.
Other Helpful Information
Let’s take a look at some of the frequently asked questions on the Philodendron DejaVu.
Is Philodendron Deja Vu Rare?
It is Philodendron Deja Vu is an extremely uncommon plant with a unique leaf that grows in a straight line. It’s still under-appreciated and very few people are aware of the plant, while it is not as well-known as the Philodendron Xanadu. The plant is not readily accessible in the majority of retail stores and garden centres.
How Do You Care For Philodendron Deja Vu?
Keep your garden in bright, indirect light conditions by maintaining a regular watering schedule. Only water once the top couple of inches of soil is completely dry. Make use of the well-drained and porous soil mix like the one is used for Cactus.
Make sure the area is comfortable and humid to ensure optimal growth results. Keep the plant safe from cold temperatures and frost because it is an exotic plant that thrives on warm temperatures. Fertilize your plant frequently every month in the growing season of spring and summer.
Conclusion On Philodendron Deja Vu
The Philodendron Deja Vu is a perennial plant that doesn’t shed its leaves in any way. If you’re looking for greenery all year long, it is the right plant. Let’s review all the essential information regarding its growth and maintenance needs.
- Philodendron Deja Vu is a perennial self-heading Philodendron with leaves with serrated edges.
- It has elongated and split leaves, which makes it appear like Philodendron Xanadu.
- It thrives in moderate to low lighting conditions. Avoid direct sun exposure.
- The plant should be watered only after the soil has dried. Be careful not to overwater it to shield the plant from root decay.
- Make use of a loose, well-draining soil mix, such as the cactus soil mix to cultivate this plant.
- Keep temperatures between 65-75 degrees Fahrenheit to ensure proper growth of the plant. Beware of exposing the plant to freezing temperatures or frost.
- Keep the humidity at or above 50 % to maintain its health.
- Plants should be repotted every 2 to 3 years once it is outgrowing their current pot.
- Propagate the plant using stem cuttings placed in a jar of water, or directly in the soil.
- There are times when it is possible to face issues like Erwinia Blight as well as Leaf Spot. It is more beneficial to prevent these diseases than to work on curing them.
If you’re seeking to bring a bit of nature to your home, add Philodendron Deja Vu to the collection for peaceful and tranquil energy.
Looking for other articles on our plant guides, then check this out