Philodendron Pastazanum Care: Philodendron pastazanum can be described as an unusual and beautiful heart-shaped Philodendron with a heart-shaped shape. It is often referred to as “my Pasta” on Social Media.
It is a native of Ecuador from a state known as Pastaza which was where it was gathered during the 1970s.
This plant is a climber which means that the stem, or rhizome, is growing in a vertical direction and not horizontally. The petioles grow in a vertical direction from the stem and are carrying the leaves.
The rhizome must not be submerged and should remain at the surface of the soil as it is the place where the leaves emerge. If it is buried, it could cause the plant to become rotten and die.
This is among the most frequent mistakes made in the care of Philodendron pastazanum. The crawlers’ rhizomes should not be dug up in the soil.
Philodendron Pastazanum Care Summary
|Light requirements:||Bright indirect sunlight that is medium to bright.|
|Watering requirements:||Do a weekly check, and water if more than 50% of the surface is dry.|
|Fertilizer:||A high-in-nitrogen-content feed every month in the spring and summer months.|
|Soil:||Well-drained soil with perlite.|
|Where to purchase:||Take a look at the Unique Plant Shops.|
|Common problems:||Root rot, pests and insects are caused by excessive watering.|
Philodendron Pastazanum Plant Care
I am growing a wide variety of heart-shaped Philodendra like Philodendron Mamei, Philodendron plowmanii, Philodendron gloriosum, Philodendron verrucosum and Philodendron Dean McDowell and Philodendron Sodiroi.
The entire Philodendron is breathtaking and one of my most loved plants in general. But, this Philodendron pastazanum is unique. It is extremely lush and green. leaf texture, as well as the size of the leaves,,, are truly stunning.
Unfortunately, there isn’t much information is available about the care of Philodendron pastazanum.
So, I decided to write down my take care of this gorgeous Aroid plant. I intend to ensure that the plant is not just doing well, but is flourishing for you.
Without further delay Let’s look at the most significant aspects of the Philodendron pastazanum treatment.
Philodendron Pastazanum Plant Care Guide
Philodendron pastazanum care requires free-draining soil. Aroid mixes are the best. The mix for potting must be breathable and made up of chunky materials like orchid bark which allows the liquid to evaporate swiftly.
The soil that is used for potting also requires elements that hold in moisture and nutrients like pumice or perlite as well as the soil itself.
Check out our article on soil mixes that drain well to find out more about the most effective ingredients to choose from.
I have used Lechuza Pon which is a non-soil mineral substrate that is a source of the mineral zeolite. My Philodendron Pastazanum loves it and does exceptionally well in this substrate.
The pH level must be maintained between 5-7 to ensure optimal soil conditions.
Philodendron Pastazanum Light Requirement
They need moderate to bright indirect lighting. Once they are acclimated to the light, they might require just a few hours of direct sun in the early morning.
Direct sunlight must not exceed a few hours, and the strong afternoon sun should be kept away from. In the event of burns, leaves can be damaged as well as damaged worst scenario.
I place my Philodendron pastazanum in an eastern-facing window that gets a few hours of direct sun and bright indirect light throughout the day.
Our article on plant light levels explains the lighting conditions for the different directions of windows in depth.
Philodendron Pastazanum Watering
The soil should be watered when it is dry. The best general rule is to water once per week. But the amount of watering required per week will be contingent on a variety of factors within your home.
The quantity of light and humidity, as well as the temperature of the soil used,,, will determine the frequency of watering.
Be cautious not to overwater your plants since they won’t appreciate being in the water for long. Be sure not to leave the soil drying completely.
To make sure that Philodendron pastazanum is in good health and has a happy plant, I highly recommend that you utilize
The ideal temperatures range to take Philodendron pastazanum treatment is 45degF-95degF (7degC 35-35degC). The temperature at night should be in the range of 60degF and 70degF (16degC 21degC – 60degF).
Philodendron pastazanum is a plant that grows in USDA zone 11 of hardiness as per the United States Department of Agriculture plant zones of hardiness.
Philodendron Pastazanum Humidity
Philodendron pastazanum is best when humidity is greater than 65 per cent. In general, humidity between 65% – 75% is the ideal range for the plants.
Don’t be concerned even if the conditions you want aren’t found in your home. There are many methods and tips to bring your home adequate levels of humidity.
Tips for Humidity #1 The best way to do this is to place your house plants close to make a microclimate that has more humidity. The closer your houseplants are situated, the higher the humidity around the plants will be.
Tips for Humidity #2 A good traditional pebble tray. Place a tray underneath the pot that you plant in and fill it up with water. Water will evaporate, increasing the humidity of your plant, starting from the base.
Tips for Humidity #3 Use a humidifier that you can adjust between 65% and 75 per cent. This is an excellent method to boost the humidity in your space, even though it’s the most expensive.
Philodendron Pastazanum Fertilizer
Make sure you use a balanced fertilizer that is half of the strength recommended for your plant in pots. You can choose to make use of liquid fertilizer, or a slow-release fertilizer.
In our fertilization guide, You will learn the basics of fertilizing your plants correctly.
Fertilize your Philodendron between spring and summer in the growth season approximately once every three months and then stop fertilizing in the winter and fall.
Philodendron Pastazanum Propagation
Propagation can occur by rhizome or stem cuttings. The advantage of Philodendron pastazanum is that when the stem is growing on the soil, the cutting is already established in the majority of instances.
Be sure that the rhizome you cut contains at the very least one node. It is possible to cut it either with or without leaves since both cuts are able for transforming into a brand new plant.
In the next section, we will go over the steps involved in success in Philodendron pastazanum propagation in greater detail.
Philodendron Pastazanum Growth Rate
Philodendron pastazanum grows like a creeper, and the Rhizome is located on top of the soil. New leaf spikes appear on the rhizome. The rate of growth of Philodendron pastazanum can be described as average at best.
The new leaves that emerge will take up to a month until they’re fully unfurled. The first sign you notice is the leaf spike, which expands vertically.
It will continue to grow longer until it emerges as the new leaf which will unfold. The anticipation of the size the next leaf will be is always extremely high.
The deeper the roots of the Philodendron pastazanum in the soil, the larger the new leaves it will develop.
New leaves come in an emerald green hue and then darken to the healthy dark green. These leaves are so beautiful that they’re the most stunning in any collection of plants.
I recommend not to use round containers as they are the most popular pots to plant pots. Because Philodendron pastazanum crawlers expand horizontally, they’ll require space to run.
The rectangular shape is the best. They don’t have to be deep, but the larger they are, the more attractive. An excellent option is flower pots that are suitable for the outdoor garden, which is usually used on balconies.
The pots I’m using come from Lechuza and are known as Lechuza Delta 10, 20 and. They have the perfect shape. There is no need to select the right pots but you’ll have an idea of which pots will work best for Philodendron pastazanum maintenance.
Step by Step Philodendron Pastazanum Propagation
Have you spotted a Pastazanum and are looking for ways to spread it. You’ve come to the right spot.
Through the step by process guide, I’ll take you through each step to ensure that your propagation efforts will be successful and there will be no long adventure.
The propagation of Philodendron is fairly simple as is propagating monstera species because the nodes of your plants mark the areas where cutting is possible.
Cuttings are the primary method to propagate the Philodendron pastazanum.
Another option is the propagation of seeds, however to work you’ll require two Philodendron pastazanum flowers simultaneously to pollinate the plants, or at a minimum, keep the pollen in a storage container to be pollinated when a second plant is in the same position.
Another method is to use micro-propagation to propagate Philodendron Pastazanum however, to success, you’ll need the right equipment for your lab and sterilized conditions.
All of this might not be needed because a simple chop-chop can allow you to increase the size of your plants in no time.
Let’s take a look at the Philodendron pastazanum step by step propagation guide:
- Take a look around your plant. Locate a plant section that has nodes
- Use the cutting shear (stems or rhizomes are very thick and difficult to remove)
- Infect the pruning shear by using the rubbing alcohol, and then place it in a hot flame for just a few seconds.
- Cut cleanly across two nodes.
- You can, but there is no need for multiple nodes to propagate Philodendron Pastazanum effectively.
- In the ideal scenario, the area that you’re cutting is established itself in the soil. This will accelerate the process of propagation
- If the cut portion has one leaf, it is wonderful also. According to my experience, leaves are discarded by your plant to make use of the energy for root growth and development.
- A humid climate will assist to keep a leaf healthy and also
- After you’ve cut cuts, sprinkle some fresh cinnamon leaves on the plant and the cut area of the cutting
- Cinnamon works as an anti-bacterial and helps to heal the wound of your plant as well as cutting
When these steps are complete, I have seen a lot of people who are wondering what to do next. The next following step would be to determine the propagation method you wish to employ.
Water is a great option, as are Sphagnum Moss soil and perlite. I’ll tell you what I do to accomplish it and the rate at which I’d guess is near 100%.
I would prefer to use Sphagnum Moss. The most significant benefit of Sphagnum Moss is its water retention capability. It is capable of holding up to 8 times its weight in water, according to on the Wildlife Trusts website.
The biggest error you could make when using Sphagnum Moss is to allow it damp. Whatever the case, whether you’re using live or dry moss one of the most important things you have to do is allow it to soak up the water.
After soaking, you will need you to press down your Sphagnum Moss very hard in your fist at minimum 3 times until all the water has been pressed out.
If you don’t do this step, your cutting won’t grow because the moss would remain damp. This can, as I said, easily be avoided, but don’t get me wrong.
It has happened to me a few times and resulted in rotting cuttings. It’s a shame and something I do not wish to happen to you.
Check out more Guide Below
But why do I choose Sphagnum Moss? Simply because there’s no other material in which I experienced a higher performance rate and noticed that cuttings developed faster.
Once you’ve decided on the appropriate medium, you will need to choose where to place your cutting. Based on the size of your cutting, I’d recommend that you use the use of a glass container.
Plastic containers can help to keep the humidity in check with minimal effort. Spray the container after you have put your cutting into it and then close the plastic container by using the lid.
In this way, you’ll have the humidity level to be at 90 per cent for several weeks. The lid can be opened every day to ensure that the air doesn’t become stagnant.
You have now got the perfect humidity, but what about the most optimal temperature? Here is the place where a heated mat is useful.
Utilizing using a heating mat will ensure that it’s comfortable and warm underneath the cutting. This can speed up the process of propagation and ensure that your cutting of Philodendron pastazanum grows roots quickly.
By following these steps and setting up I can assure you that almost nothing can be a problem and the spread of your pastazanum Philodendron will be as rapid as it gets.
What do you think about the rooting hormone? It’s possible to use it. I have used it at least once but I realized that it didn’t have a huge impact in any way.
The methods and setups I’ve described will multiply your pasta, so I can assure you of this.
Common Issues in conjunction with Philodendron Pastazanum
Philodendron Pastazanum leaf with damage from spider mites
These are some of the most destructive pests you’ll encounter. I’ve battled Spider mites in my Philodendron pastazanum over the last few several months.
They’re nearly impossible to detect from my observations. They don’t just hide perfectly in the crevices and crevices in your houseplant but they are also very small.
Spider mites cause webbing on the petioles and the leaves that you have on your Pastazanum and may cause damage to the leaves of the plant.
The leaves eventually turn yellow before dying off. Another indication is the damaged leaves with holes that could indicate spider mites.
If you’re unsure whether your Philodendron Pastazanum is plagued by spider mites, we have a comprehensive guide that will teach readers everything you must be aware of the spider mite problem and more importantly how to eliminate these pests for good.
Not as harmful as spider mites but less difficult to detect are mealybugs. They look like cotton balls. At first glance, you might imagine that dust has fallen on your Philodendron Pastazanum.
A single mealybug could lay up to 600 eggs, so it is vital to spot these pests before they appear. They’ll stay in the same spot and consume your plants in large quantities.
Mealybugs are plant sap-sucking kind. They can saturate your plants with vital minerals and water.
In the end, your Philodendron pastazanum may even die because of the disease. Therefore, it is essential to take action against mealybugs.
In our article on mealybugs and the best way to eliminate them you’re on the right track to success.
Thrips can be disgusting. They carry illnesses and can experience their bite when you are an individual. So, it’s no wonder why you do not wish to have them on the Philodendron Pastazanum.
Although I’ve never seen them infest my plants, the tales that are shared about them are terrifying. They measure about 1 millimetre in length and appear to be tiny grasshoppers sporting wings.
They are asexual, and they can reproduce independently.
If you feed them on pastazanum of Philodendron, they neutralize a poison known as salvia. They can also transmit multiple viruses. This is why they are so horrendous.
The yellow and wilting leaves that have curled tips on the leaf can be signs of thrip-related damage.
If you suspect you may have a Thrips infestation, do not be afraid to go straight to our post on the trips as well as the best strategies to counter them.
Scale is very widespread and an infestation is likely to occur in your Philodendron. It looks like tiny slugs, and the most popular scale that is commonly seen in the garden is the brown. We highlighted it in the last Plant pest article.
They feed on the sap of the plant and suck the plant. The scale itself doesn’t move often and prefers to remain in one place.
They’re generally brown, flat and oval. They feel like huge quantities. They are prolific and difficult to detect. If the problem isn’t too severe, chances of survival are high with the Philodendron pastazanum.
Of all the known bug species, the whiteflies are the ones I fear the most. They can be a nuisance and be quite nasty.
But, they’re relatively easy to eradicate and your Philodendron pastazanum isn’t at risk of dying.
What can you do to determine whether you have whiteflies on your plants? The most effective method is to pick the leaf and shake it. The whiteflies will fly off and turn into airborne.
They’re suckers of sap too and are not just nuisances, but they are also capable to cause harm to your Philodendron.
Let’s take a look at some of the general tips and techniques to keep your plants healthy.
The yellow leaves are typically an indication of excessive soil moisture. If you’re watering your plants often or the water doesn’t drain fast enough your plant will tell you this with yellowed leaves.
It is for me a sign an indication that I need to take a look at your Philodendron since I typically notice root rot which requires treatment. It is possible to take a look at our root Rot Treatment guide.
Tips of brown leaf
Lack of frequent watering or too little or too much sometimes could cause the tips of your leaves to turn brown over the Philodendron pastazanum.
A leaf that has a brown tip suggests to me that something isn’t the best. This doesn’t mean your plant is seriously ill or that it is likely to die however, there’s a problem within your Philodendron maintenance that could be improved.
Tips to maintain your pastazanum of Philodendron problem-free
The best care suggestions you can follow for Philodendron pastazanum are:
- Create a well-draining potting mixture with the bark of orchids, perlite and a little pot of soil
- It is recommended to water the soil once per week when the soil is beginning to dry out
- Do not place the Rhizome (stem) that you have planted in your Philodendron pastazanum on top of the soil
- The light that is bright and indirect will be ideal and will result in big leaf development
- Be sure to inspect your plant often to identify any issues or diseases before they become serious.
Moving onto some of the questions that are frequently requested regarding this Philodendron pastazanum.
Frequently Asked Questions About Philodendron Pastazanum?
Do I need to cut off the brown edges from my plant?
The brown tips as well as the areas of brown in the leaf of your Philodendron can be cut off. This will stop these areas from growing over the entire leaf. Additionally, the areas that are crispy and brown don’t produce chlorophyll anymore and will not be useful to the plant.
Why does my Philodendron pastazanum die?
There are a variety of reasons why a Philodendron pastazanum is dying. It may be overwhelmed by a nutrient deficiency or underwatered. an infestation of pests could be the reason. The most likely cause that a Philodendron is dying is excessive watering. In this case, look at its roots, and then remove the rotting or decaying roots.
What is the most frequent time I have to keep a Philodendron pastazanum hydrated?
The general rule is to water once per week. The soil should be watered when it is about to dry out, but don’t let it completely dry out.
What can we do with the Rhizome?
The rhizome is located above the soil. If you place it in soil, it could result in rotting and increase the chance of getting your Philodendron pastazanum will be dead.
Conclusion On Philodendron Pastazanum
Philodendron pastazanum is my favourite heart leaf-shaped creeping Philodendron.
The only close thing to it is Philodendron Dean McDowell which is an intermixture of Philodendron Gloriosum along with pastazanum of a Philodendron pastazanum that is typically known by the name Philodendron Gloriosum and Philodendron pastazanum.
What I am most fond of is the gorgeous green leaves that grow massive with time and are also easy to maintain.
As long as you’re not overdoing it with watering, and your Philodendron pastazanum grows placed in a thick, airy soil most likely to flourish and you’ll encounter no issues.
The toughest part is finding an example as they aren’t widely sold and once they become accessible through Facebook, Instagram, or any other online store for this purpose, they’re quickly gone.
What are your top care tips and techniques for Philodendron Pastazanum? Tell us in the comment section below.
Looking for other articles on our plant guides, then check this out