Philodendron Red Moon Care: If you’re lucky enough to obtain an amazing philodendron red moon, you’ll need to be aware of how to take care of it. The philodendron’s red moon is recognized by its stunning light lime leaves that have deep red streaks that run through every leaf. The leaves will then darken to delicate tropical green in time.
They can appear in full red, with glowing yellow splotches, or they may look like half-moons, where one leaf has the same yellow and red colouring.
If your plant is mature you’ll usually see gorgeous more red-coloured stems on some leaves as well!
Philodendron Red Moon Care – 11 Proven Ultimate Guides For You
The most important thing to do when it comes to caring for your philodendron’s red moon is to recreate the conditions in which it naturally growing as much as feasible.
In this instance, we’re talking about the dense lush tropical canopy. This guide can help you achieve exactly what you want!
1. Philodendron Red Moon Soil Mixture
The philodendron’s red moon will thrive in a humid Aroid potting mix that’s quick draining and rich in organic matter.
It is typically a mixture of orchid bark, cocoa coir perlite and horticultural charcoal with a high-quality potting mix.
It is essential to avoid wet or muddy, sandy soils that are dry and dry.
You could also enrich your soil with Worm casts (it’s almost like earthworm manure) which act like a fertilizer that is natural and can be a great soil enrichment.
Pro Tips: If you’ve purchased your plant online and requires shipping to another location, I strongly suggest adding diluted super thrive to your soil (usually only 1-2 drops of water) is an effective stress relief after long journeys.
2. Philodendron Red Moon Light Requirement
As with the majority of philodendron species, the red moon enjoys direct, bright sunlight, and can also cope with lower lighting conditions.
To mimic the natural growth surroundings, you’ll need to offer filtering sunlight. Filtered sunlight is also referred to as dappled light, which means that your plant is not affected by direct light beams that bounce directly onto its leaves.
In nature, it is accomplished by the use of open-canopied trees in which light is first filtered. A thin shade or net near an opening would accomplish the same thing in a home.
Tips: The philodendron red moon is at its best in moderate to low light however, it should never be in completely direct and full sun. This could cause darkening edges, or even scorch marks with blackened marks on the leaves’ delicate surface.
3. Philodendron Red Moon Watering
The tiny (or large) home plant can be described as a tropical species and likes moist soil. But one thing it doesn’t like? the soil that is soaked with water. Big no-no. If you drink too much water, it will ultimately cause root rot.
Your plant should be watered near the root, not above until the soil’s top layer is wet.
If you’ve got a properly draining mix of potting soil (as mentioned earlier) the entire root system must receive water as the air pockets will permit complete drainage.
The appearance and feel of moist soil are like soil that’s a bit of being soggy. The soil should not completely dry out between irrigations.
Tips: If the soil is getting clumped together or separating off the edges of your pot it’s time to add some water immediately.
For your plant to look at its best throughout its growing stages It is important to place your plant in a relatively warm climate. Between 60-80 Degrees Fahrenheit (15degC-26degC) is ideal.
The plant in question is more of a lover of warmth and therefore, erring on the warmer side of the spectrum can result in more vibrant colours.
The temperature must never fall below 55 degrees Fahrenheit or else the plant could be shocked which can cause a slow but not stagnant, lower than average growth.
To keep those silky, thick leaves healthy and glossy It is important to ensure that your red moon of philodendron is getting moderate to high levels of humidity. Think 60%+. Yes, really!
This is similar to the natural growth environment of the canopy of the tropical forest.
Higher levels of humidity lead to thicker, broader and larger leaves.
I suggest using a digital hygrometer for checking the humidity levels around the new plant’s location.
If you want to boost the level of humidity you can try these suggestions:
- Make use of a humidifier
- Collect other tropical plants to form a ‘humidity sharing biome’
- Cover a tray with pebbles, then place the pot of plant on these pebbles (not in the water). The transpiration process increases the level of humidity surrounding the plant.
6. Philodendron Red Moon Fertilizer
The red moon of the Philodendron requires fertilization three times a year, with the bulk of that occurring during the summer and spring growing seasons.
There are numerous kinds of fertilizers available like balanced liquids, granular, as well as slow-release.
Best Fertilizer for Philodendron Red Moon
For the best results, I suggest purchasing the complete liquid fertilizer, that is free of Urea. Dyna cultivates pro the 7-9-5 formula precisely does that. It has all 16 micro and macronutrients your philodendron needs.
Additionally, it’s extremely low in salts with heavy residue that in time can cause root burn.
What is the best way to fertilize Your Red Moon Plant
Simply dilute 1 teaspoon of Dyna Grow with a gallon of freshwater to nourish your plants. This quantity will feed my entire plant collection. It is also well-behaved in the storage area for use later on. As of now, I’ve seen leaves unfurling, with more vibrant colours, thicker leaves and a healthier overall root system!
Notice: I used to use slow-release tablets from Osmocote However, due to reasons unknown, they altered their formula and added microplastics. After watering, you’re left with thousands of tiny microplastic beads inside your containers. Not eco-friendly.
What Nutrients to Look Out For
In terms of nutrients be sure your fertilizer is a balanced mix between nitrogen and phosphorus and potassium.
Nitrogen promotes the growth of leaves, phosphorus aids plants convert energy into nutrients and potassium helps promote healthy root, stem, and leaf growth.
A quality or complete fertilizer should include the following micronutrients essential to human health such as magnesium, zinc-iron, zinc, as well as calcium.
Is More Fertilizer Better for My Plant?
Nope! Although no fertilizer can cause extremely slow or zero growth, too much fertilizer could kill your brand new houseplant. The reason is that fertilizers are made up of salts in huge quantities that could cause the root system to be burned off your plant.
Can I Pick a Cheap Fertilizer? What’s the Difference?
I’m all about making a few extra dollars in the past, but you’ll need to pick an organic fertilizer that is of the highest quality for your Philodendron.
Low-cost fertilizers are generally packed with heavy nitrogen salts that over time leave traces on and within the soil.
As it accumulates this residue can cause significant damage to the leaf stem and root system by the heat it produces.
It’s like adding a whole tub of sea salt over your favourite food – it’s like ruining the meal.
TIP: Added too much fertilizer? You can eliminate the salts from the soil by slow introduction of a steady flow of water into your soil until it drains through drain holes. You must ensure that you aren’t drowning the plant.
7. Philodendron Red Moon Repotting
The red moon of the philodendron can’t do well with root entrapment, at least not for a long time. If you want to keep your plant well-nourished and content, you’ll be looking for indicators that your plant needs replenishment.
The signs are:
- The plant’s physical form is large for its pot.
- The foliage is becoming in a dense and lush
- Its root system is bound (you can observe this by looking through an ornamental pot)
- It is showing indications of slow or slow growth.
- The roots are visible through the drainage holes.
Repotting can cause small discomfort to your plant, however being root-bound can cause more stress, which is why it’s worth the effort.
The growth of each plant is unique however, it is typical for this plant to require to be repotted every few years or at the very least until it is mature enough to its full size, which may be about 3 feet tall.
If you are repotting, make sure to be sure to follow these steps:
- Repot at the start of spring when it’s beginning an exciting new stage of growth
- Select a pot 2 to 3 inches larger than the one you have previously. This plant thrives best with its roots allowed to grow and spread.
- Choose a pot that has drainage holes.
- Make a mix of top quality potting soils with organic content
Attention: Just bought your tiny red moon Philodendron? It’s likely to require to be repotted immediately. Plants are typically sold by sellers after they’ve exhausted their capacity.
8. Growth – What Can I Expect?
Under ideal conditions, the philodendron’s red moon can reach 3 feet tall and 2 feet wide.
A thing to keep in mind is that new leaves look like they are curled. Certain leaves may appear green while others will have that stunning red streak.
9. Philodendron Red Moon Pruning
If you have the right conditions your houseplant will thrive. This means dense and thick foliage. To maintain its shape and appear its best it is possible to do periodic pruning, either once or twice per year. It’s fairly simple to maintain in terms of pruning.
Prune immediately you’ll often want to get rid of a leaf that is damaged, dead or turning brown, yellow or is showing indications of infestations by pests.
Take into consideration trimming: Leggy foliage to promote better growth.
To trim, you’ll need to make use of a tidy pair of pruning scissors. trim the stems that contain individual leaves, not the trunk that holds them all.
Q. The My Philodendron Red Moon Has Come with Aerial Roots – Should I prune them?
Nope! These aerial roots provide stabilization to your plant. Pruning them could result in damage to the entire root system.
You can remove them from the bottom of the container (and continue to keep them hydrated) or in some situations, you can encourage them to be soil-bound.
If they’re still young roots e.g. aren’t yet brown You can moisten the roots to help make them flexible and gradually introduce them into the soil.
The truth is that It is best to not disturb them alone. I’ve found aerial roots can find their way into the soil if left unattended.
Check Out This Guide
- Alocasia Chantrieri Care
- Alocasia Sinuata Care
- Alocasia scalprum Care
- Alocasia Pink Dragon Care
- Hoya Krohniana
- Alocasia Jacklyn Care
- Alocasia Sarian Care
10. Philodendron Red Moon Propagation: How to Propagate a Philodendron Red Moon
The most efficient method to reproduce this red moon is to collect cuttings of the stem to plant them into fertile organic soil.
You could also try the method of water propagation for this plant, however, I’ve noticed that the red moon seems to help develop roots that are stronger when placed in a premium plant potting mix.
Before you propagate, make sure to check for diseased or damaged leaves. Then trim away.
Don’t remove a leaf. They look as if they are curled up. They can be either red or green in hue. The new leaves aren’t suitable to propagate. You’ll need to select an established stem.
To reproduce, you’ll need to follow these steps:
- Select a stem with a healthy sturdy leaf.
- Create a small pot of well-drained, moist potting mix (see the section on soil)
- If you have a good pair of pruning scissors, trim the stem down to about 3-4 inches in length
- Dip the fresh-cut stem into the rooting hormone solution or powder.
- The stem should be planted in the potting mix you have prepared.
- Put it in a space that receives bright, indirect light
- The usual water as it is.
Within three to five weeks, roots should begin to develop. To know whether roots are beginning to grow, gently tug (and I’m referring to very gently) at the base on the plant’s stem.
If there’s resistance, it means you have roots. If not, you’ll have to let it sit longer in the soil before moving to a larger container.
11. Common Pests & Diseases to Watch Out For
It’s good to be aware that philodendrons are fairly resistant to most insects and diseases. The most important things to look out for include:
- Erwinia Blight Disease
All of these issues can be avoided if your plant is taken care of properly and is kept in a good plant environment.
How to Treat Common Houseplant Pests
Mealybugs and scale, thrips Aphids, scale, and thrips are typical household pests that often arise due to soil contamination bad sanitation before purchase or through interactions with plants.
Fortunately, they can all be eradicated with the help of Neem oil. Neem oil is an organic oil, which when crushed, is a natural insecticide. It’s a green alternative to synthetic insecticides.
Mix it to the strength recommended that is recommended by the manufacturer you are buying. Neem oil can be purchased in many garden stores as well as on Amazon and Etsy.
How to Treat (+ Prevent) Erwinia Blight Disease
Erwinia Blight Disease However, it’s somewhat more difficult to manage. It’s much simpler to prevent than to treat.
It’s a bacterial disease that causes see-through, wet-looking patches of the mushy plant. The majority of cases begin on the stems, and if not treated it can spread to leaves.
It’s a serious infection and could cause death to your plant within days. Erwinia can be caused by excessive watering from the overhead (this is why I suggest not to the mist of water on the foliage).
Cut the affected leaves as soon as you notice them and change the potting mix and avoid overwatering. If the illness has spread across a lot of leaves or too many parts of the stem there’s a good chance you’ll be able to save it.
Common FAQ – Your Philodendron Red Moon Care Questions Answered
I’ve imported this Plant What do I need to know?
The care of plants that are imported by mail is vastly different than taking care of a plant you purchased from a nursery, at least during the beginning.
Here are some of the most important things you should be aware of about your red moon following its importation:
1. Your plant’s roots are likely to be covered in moss. Don’t plant it on it.
Moss is wrapped around the root ball to maintain moisture throughout the process of transportation. Moss is excellent in retaining water, but when the soil becomes dry, it can’t hold water well.
The moss expands, leading to a significant chance of soil becoming waterlogged after being watered. It’s not a good idea. Remove before planting.
2. Your leaves could be dying (all of them) This is normal.
The situation can cause plant owners to be concerned, but this is a common occurrence. The pressure of transport can cause you to lose at least some of the leaves your plant was shipped with.
It could take a few several months, or perhaps several growth cycles before you can see new leaves sprouting.
3. You’ll have to isolate and disinfect it before including it in your collection of plants.
To prevent potential pests or diseases from infecting your entire collection of plants You’ll need to isolate it for about a week and apply some neem oil on the stems and leaves to be on the safe side.
Many plant owners dip their plants in a highly diluted solution of hydrogen peroxide for a short time to completely kill anything they may have overlooked. (I’ve never personally done this however I’ve seen a lot of botanists use this method).
4. It’ll suffer a transit shock, however, you can reduce the impact.
Transit shock is quite common, especially if you’ve brought in your plant. It is possible to apply diluted super thrive to the soil, which can act as a natural stress relief.
Help! What’s Wrong With My Plant? – Common Red Moon Philodendron Problems
1. The leaves are changing colour
The yellowing leaves can be the result of water overflow or poor drainage. They can also indicate the soil being soaked with water. Replace the potting mix and trim fallen or injured leaves.
The yellow leaves may also indicate bugs or a lack of sunlight. It is possible to have more than one issue simultaneously.
Leaves that don’t get enough sunlight tend to get darker initially, as they adjust to the lower lighting conditions, but with time, they’ll turn yellow.
2. Edges of the leaf are becoming brown
The edges that are brown on the leaves of philodendron can be a sign of waterlogging. It’s a good thing, as this is typically the first indication that your plant’s not getting sufficient moisture.
If the leaves begin to fall or curl This is an indication that the leaves are extremely dry.
Examine the quality of your mixing mix to ensure there aren’t any large dry lumps. If your mix appears to be breaking away towards the edges of the pot you need to be rehydrated as soon as feasible to prevent any further damage.
3. New leaves are curly
It’s not an issue, but many plant owners believe it is. In reality, this is an indication to know that the plant you have is well-maintained!
New leaves are appearing on the philodendron’s the red moon curl begin to shoot. They usually are coloured in yellow and red as well as pure green.
This is the normal variation and leaves that shouldn’t be cut.
4. It appears that the Red Variation is muted, is this an issue?
If everything else about your plant appears healthy i.e there are no leaves that have yellowed or browning edges, indications of insects, etc it’s perfectly normal.
A muted red colour indicates that the leaf is older and less mature. The younger leaves are those with that striking glowing red hue. As they get older, they lose their colour.
5 – The variegation has been disappearing and the code is slow
Variegation that disappears is normal since this plant can return to its mother plant if the genetic change is unstable. however, If the plant you have is losing variation and appears limp, it’s an indication that your plant doesn’t get sufficient light, bright and indirect.
Try placing it in a light area, trim some of the leggy parts and then see if this helps improve the overall health of the plants.
Toxicity – Is the Philodendron Red Moon Toxic?
Unfortunately, yes. Like many philodendron species, the red moon of philodendron is toxic for dogs, cats as well as small children, ingestion.
Is the Philodendron Red Moon a Climbing Plant?
If given the chance it will grow! The plant is prone to climbing as it matures.
Younger plants and those that are younger tend to be upright, and then the leaves gather for a time before ascending. When it starts to spread it can be provided with an appropriate pole to climb if you want.
How Much is A Philodendron Red Moon to Buy?
You can expect to pay a nice amount for this plant. I’ve seen just three available in a single year! The lowest price was $432, with only one stem cutting. The rest ranged from $1800 to $2400.
And don’t be surprised if it takes you a while to wait on a waiting list or attend an auction site to bid on one.
It’s a rare variety which, although it gradually changes over time because the genetic mutation it’s inherited isn’t permanent, it’s a highly sought-after item that people who own plants want to include to have in their collection.
Where Can I Buy a Philodendron Red Moon?
It’s a difficult plant to find however, on occasion you may discover stem cuttings as well as mature plants on sale at reputable nurseries for philodendrons such as this one or on Etsy. Garden centres in the local area aren’t inclined to have this rare plant.
Looking for other articles on our plant guides, then check this out
- Why is My Zebra Plant Leaves Turning Brown?
- cobra fern plant care guide
- Pothos Plant Care
- Why is my asparagus fern yellowing?
- Why Are My Caladium Leaves Curling?
- Here are the five steps to take to care of a snake plant